Pet Carrier Guides | Pet Carrier Factory

300 guides live here. Each one answers its question in the first paragraph, then sets out the specification, the test method behind it and the commercial terms that apply. Nothing in this library is written as a consumer review - it is written for buyers who have to sign off a tech pack.

Find guides by intent

Intent	What the guides cover	Where to start
Choosing a specification	Size charts, weight classes, material comparisons	Start with the platform guides in each family
Meeting a deadline	MOQ, sample lead time, bulk production, shipping	Read the commercial guides before requesting a quote
Clearing compliance	CPSIA, REACH, Proposition 65, airline rules	Match the destination market to the right document set
Fixing a known failure	Zipper returns, mesh tears, strap fraying	Look for the test-method guides before changing components

Editorial standard behind these guides

Every guide follows the same discipline. Figures stated in a guide either come from a named standard, from our own measurement log, or they are explicitly labelled as planning ranges. Where a standard is referenced, the guide names the test method rather than just the organisation, so a buyer's own laboratory can reproduce the result. Where a number is a planning range - moisture pickup, moulded-part shrinkage, or freight cost per carton - the guide says so, because a buyer budgeting against a falsely precise figure will hit trouble later.

Guides are updated when the underlying specification changes. When a test method is revised by its issuing body, the affected guides are re-checked even if the product has not changed, because the older pass/fail threshold may no longer be defensible. Revision dates appear on every page and the feed is updated at the same time.

Reference figures used across the library

These are the working figures quoted throughout, stated once here so each individual guide can stay focused:

Figure	Standard value	Condition
Minimum order	500 pieces per colourway	Sizes may be mixed inside one style
First sample	6-10 working days	From confirmed tech pack
Revision rounds	3-5 working days each	Most programmes need one or two
Bulk production	35-50 days	From sample approval
Inspection level	AQL 2.5	Pre-shipment, third-party accepted
Payment terms	T/T 30/70	Balance before shipment
Primary load port	FOB Xiamen	DDP and EXW on request

Terminology used in these guides

A few terms recur and are worth defining once. Open area means the ratio of mesh to total shell surface, measured flat rather than on the assembled bag. Permanent set is the deformation a base board keeps after a static load is removed. Back-drive describes the distance a zipper slider travels backwards under a pushing load, which is the measurement that predicts whether a cat can open a bag from inside. Cycle time in these pages means working days on our side, excluding courier transit.

Reading order for a first-time buyer

If you have never commissioned a pet carrier before, four guides cover most of what goes wrong. Start with the platform or shell question, then the material decision, then the commercial terms, then the document set for your market. Reading them in that order keeps the later decisions cheap, because most expensive mistakes are locked in at the specification stage.

Dog Carrier Backpack

Backpack carriers for dogs, written around weight classes, strap geometry and airflow rather than colour options.

Browse all 101 Dog Carrier Backpack guides →

Cat Carrier & Travel Bag

Cat carriers and travel bags, focused on containment, shell choice and cleaning cycles.

Browse all 99 Cat Carrier & Travel Bag guides →

Pet Carrier Accessories

The parts and companion items that sit around a carrier: spares, bowls, leads and hygiene lines.

Browse all 100 Pet Carrier Accessories guides →

Ready to start a pet carrier programme? MOQ 500 pieces per colourway, samples in 6-10 working days, bulk production in 35-50 days under AQL 2.5 inspection.

Request a quote Ask for samples

Pet Carrier Knowledge Base