Short version: MOQ is 500 pieces per colourway, samples take 6-10 working days, bulk production takes 35-50 days after approval, inspection runs at AQL 2.5, and standard terms are T/T 30/70 FOB Xiamen. Everything below expands on that.
Dog Carrier Backpack
How do I choose between a soft carrier and a framed carrier?
Soft carriers fold, pack flat and cost less, but they rely entirely on the base board and perimeter reinforcement for shape, so they are limited to roughly the 3-12 kg band. A framed or semi-rigid carrier adds a perimeter wire or moulded frame, holds shape on a shelf, and supports 15-25 kg, at roughly 30-45% higher FOB and about 20% more freight volume because it does not compress.
Do the pet cavity and the laptop cavity need separate zips?
Yes, always. A shared opening defeats the zone separation entirely and exposes the device to moisture, hair and direct impact from the animal.
What is included in an FOB Xiamen price?
Goods, export packing and loading onto the vessel. Freight, insurance and import clearance sit with the buyer. DDP is available at typically 18 to 32 percent above the FOB figure depending on lane and duty classification.
Is fibre content stated by weight or by volume?
By weight, in descending order, using generic fibre names rather than trade names. A trade name such as Cordura must be accompanied by the generic name. Coatings are not fibres and are declared separately.
What multiplier converts retail value to wholesale value?
Between 2.5 and 4 depending on channel. Direct-to-consumer sits at the lower end because it removes a distributor layer; pet-specialty retail sits at the higher end.
Who owns the design in an OEM program?
Ownership is defined by contract. The buyer should state rights for supplied artwork, patterns, tooling, custom components, and any engineering work created during development.
What is mesh open area?
It is the proportion of unobstructed opening within a defined area, measured under a stated tension or condition.
How is growth handled in the interior dimensions?
Interior dimensions are sized to the adult end of the class — 150-240 mm wide, 260-420 mm long — and reduced with an adjustable divider that sets usable length to about 60% for a young animal and releases as it grows.
What interior dimensions suit the French Bulldog class?
300-380 mm wide, 480-620 mm long and 300-400 mm high. Shoulder width of 250-320 mm is the governing cross-section and is wider than a leaner dog of the same mass, so a length-and-weight chart under-sizes it.
What fabric weight suits the medium class?
900D or 1000D coated polyester at 280-340 g/m², or 600D with a ripstop grid where weight matters. Coating weight is 35-50 g/m² of dry solids on TPU or a PVC-free polyolefin.
What interior dimensions suit the Pit Bull class?
Around 400-460 mm wide, 620-720 mm long and 480-560 mm high, derived from a chest girth of 65-80 cm and a body length of 60-75 cm. The proportions are short and wide rather than long and low, which is why a hound-derived shell shape fits badly.
What interior dimensions suit the Saint Bernard class?
580-680 mm wide, 980-1,130 mm long and 700-820 mm high, from a body length of 900-1,100 mm, shoulder height of 700-900 mm and chest girth of 100-130 cm, with a hard declared limit of 80 kg.
Cat Carrier & Travel Bag
What belongs in a complete RFQ data package?
Seven artefacts: a dimensioned drawing with tolerances, a bill of materials named by specification, a rated load with its safety factor, applicable regulatory requirements, a colour standard, packaging specification, and a measurable acceptance criteria list.
Why is concealed structure more expensive than visible structure?
Because it cannot be produced by thickening what already exists. Every concealed panel adds components rather than mass, which is why the increment runs 3.00-7.50 USD over a functional product of the same volume.
Why design to the tightest published limit rather than the average?
Under-seat space is not rectangular: seat rails intrude, the space narrows toward the rear, and on many aircraft the height falls toward the window. A carrier at the nominal limit fits a minority of seats.
Why is a sideways carrier worse than a forward one?
It places the animal's axis perpendicular to travel, maximising lateral acceleration at the head. Axis alignment within 20 degrees of the direction of travel is the requirement.
What is hydrostatic head and how is it measured?
It is the height of a water column, in millimetres, at which the third drop penetrates the reverse face of a clamped specimen. It is the primary measurement separating water-resistant from waterproof performance.
What is the minimum stroke width a printer can hold?
0.15-0.25 mm for a heat transfer and 0.25-0.45 mm for screen print. Below those figures the ink fills in and fine detail disappears, so a logo with hairline elements should be transferred rather than printed.
What is MOQ under DDP terms?
500 pieces per colourway, unchanged. Delivery terms govern the journey rather than the production minimum, so samples remain at 6-10 working days and bulk at 35-50 days.
What is a dimensional weight divisor?
The number the cubic volume is divided by to produce a billable weight, typically 5,000 or 6,000 depending on carrier and service. Carriers bill the greater of dimensional and actual weight.
Can pet taxi carriers be stacked while occupied?
No. Each occupied soft carrier needs its own approved vehicle position, restraint, ventilation clearance, and emergency access.
Why do physical colour swatches fail as long-term standards?
A handled swatch drifts Delta-E 0.5-1.5 per year under fluorescent lighting and more under daylight. Over three years that shifts an entire programme, which is why a sealed primary and a spectral data file are needed.
What reorder trigger suits an evergreen title?
A quarterly cycle at 55-70% of first-year volume, with ninety days of inventory cover. A single-article capsule reorders once or twice and then stops, and needs only thirty days of cover.
Why does the margin rung matter more than material choice?
Because it is set before design begins and its range is wide. At 34-48% of a 59 USD retail, the difference is 5.46-14.40 USD of FOB budget, which is more than any material negotiation recovers.
Pet Carrier Accessories
What is the difference between an add-on and a spare part?
An add-on extends function and is merchandisable on its own — a rain cover, a padded strap. A spare part is an identical replacement for a component that failed — a replacement zipper slider, a replacement wheel. Both are ordered as separate SKUs, but the add-on is sold to extend and the spare is sold to restore.
What is the minimum order for replacement handles?
MOQ 500 pieces per specification. Because a handle is the most expensive accessory in a programme, the practical approach is to specify one handle across two or three platform sizes that share a mount, which meets the commitment once.
What is the MOQ for a custom phone pocket?
MOQ 500 pieces per colourway. Because the window film is a common component across colourways, the mixed rule applies at 200 per colourway against a 500-piece total, so a three-colour launch runs at 600 units.
Why is a fixed collar width across a size range a poor specification?
A single width is over-wide on a small neck, where it abrades the jaw, and under-wide on a large one, where it concentrates load above 2.4 N/cm².
Why does a superabsorbent polymer underperform its uptake number?
The water is chemically bound rather than capillary-held, so it releases at 3-7 grams per square metre per minute against 8-18 for a nonwoven. The vest feels wet and cools weakly.
What is the minimum contrast ratio for a readable numeral?
4.5:1 between the numeral and the ground. A pastel-on-pastel design measures 1.3-1.9:1 and disappears at photograph distance; a dark numeral on a light ground measures 6-12:1.
Why mount the module on the dorsal aspect rather than the throat?
A patch antenna needs a sky view. A unit under the jaw loses 25-55% of the sky view and its fix rate drops accordingly.
What is the difference between coral fleece and Sherpa?
Coral fleece is a weft knit raised to a 1.5-6 millimetre pile at 200-420 grams per square metre; Sherpa is a warp knit with a 4-14 millimetre pile that is warmer per gram at 0.14-0.30 and costs 18-52% more.
Why judge this item by cost per delivered dose?
A 30 ml bottle is roughly twenty applications for 0.48-1.15 USD; twenty vials cost 3.60-10.40 USD. The multi-dose bottle wins on cost, and the vial wins on portability and hygiene assurance.
What is the MOQ for a printed supplement sleeve?
MOQ is 500 pieces per colourway and per print design for the components we build. Separate minimums apply to print plates and to any bought-in closure component, both quoted individually at quotation stage so they can be compared fairly.
Why must usable capacity differ from brimful capacity?
Headspace is needed for shaking and thermal expansion. A 1.5-litre nominal body may provide about 1.42 litres usable while holding 1.62 litres at the brim.
Why is an equal-shape control necessary?
Open diameter and fill mass change heat loss. A different-shaped plain bowl cannot isolate the benefit created by the insulated wall.
Still have a question? MOQ 500 pieces per colourway, samples in 6-10 working days, bulk production in 35-50 days under AQL 2.5 inspection.
Request a quote Ask for samples